tommee tippee bottle warmer instructions pdf

Step-by-Step Guide to Using the Tommee Tippee Bottle Warmer

Using the Tommee Tippee Bottle Warmer is a straightforward process that ensures your baby’s bottle or food is heated safely and evenly. Follow these steps to make the most of your product:

1. Prepare the Warmer

   Before first use, ensure the bottle warmer is clean and dry. Plug it in and run one cycle without a bottle to prepare it for use. This step helps remove any manufacturing residues and ensures the warmer is ready for heating.

   

2. Place the Bottle in the Warmer

   Fill the baby bottle with the desired amount of milk or formula. Ensure the bottle is compatible with the Tommee Tippee Bottle Warmer. Carefully place the filled bottle into the warmer, making sure it is centered and stable.

3. Fill the Warmer with Water

   Using a jug or bottle, fill the warmer with fresh water to the recommended level. For most models, this is approximately 10mm below the rim of the warmer. Avoid overfilling, as this can cause water to spill during heating. For smaller bottles, fill to the underside of the screw ring.

4. Plug In and Set the Temperature

   Connect the warmer to a power source. Depending on your model, you may need to adjust the temperature using the control dial or buttons. Refer to the user manual for specific instructions on selecting the correct heat setting for your bottle size and type of milk.

5. Heat the Bottle

   Turn on the warmer and allow it to heat the bottle. The heating time will vary depending on the size of the bottle and the temperature setting. Always follow the recommended heating times provided in the manual to avoid overheating the milk.

   

   

6. Let It Cool Slightly

   Once the heating cycle is complete, carefully remove the bottle from the warmer using the handles or tongs provided. Let it cool for a minute or two to ensure the temperature is safe for your baby.

   

7. Check the Temperature

   Before feeding your baby, always test the temperature of the milk by shaking a few drops onto the inside of your wrist. It should feel warm but not hot. If it’s too hot, let it cool for a few more minutes.

8. Clean the Warmer

   After each use, unplug the warmer and clean it with a damp cloth. Avoid submerging the electrical components in water. Regular cleaning prevents mineral buildup and ensures optimal performance.

   

9. Store Properly

   Once cleaned and dried, store the warmer in a cool, dry place. Avoid leaving it near direct sunlight or heat sources.

   

By following these steps, you can safely and effectively use the Tommee Tippee Bottle Warmer to provide your baby with a perfectly heated meal every time. Always refer to the user manual for model-specific instructions and safety guidelines.